Modelled lake temperature (1 m depth) – Water temperature
This model series shows Water temperature for Lake Baldegg at the depth specified in the series name. It is not a point measurement at the shore.
Modelled or estimated value
12.4°C
Value timestamp:
This value comes from a model or an estimate, not a direct measurement at this location.
Current context
Largely stable over the last 24 hours. 1.5 °C lower than 7 days ago.
What does this change mean?
“Largely stable” means the change from about 24 hours earlier is less than 0.3 °C. There may still have been a warmer afternoon or a cooler night.
We compare values at the same station at two points in time. If no suitably timed comparison value exists, we omit that statement. An unchanged value does not mean a seasonal normal or an all-clear. Changes below the displayed precision are also described as stable.
Past 30 days at a glance
Very lowMedian of available daily means: 16.0 °C · 30 days in the comparison window.
The current individual value is compared with available daily means from the last 30 complete days, using Coordinated Universal Time (UTC) for day boundaries. Min. and max. refer to daily means, not individual peaks. A day counts when values exist; gaps can affect its mean. For model series, this compares model values. “High” refers to this short window, not an official danger level or a seasonal normal.
Source
Modelled lake temperature (1 m depth)
Alplakes model calculation, not a direct on-site measurement.
Operationelles Simstrat-1D-Modell von Alplakes/Eawag, Temperatur in 1 m Tiefe; modellierter Wert, keine lokale Messung
Measurement time: Nov 8, 2026, 2:00 PM
Alplakes (Eawag) – Simstrat-Modell ↗Change across the visible readings
-1.5 °C
11/01 – 11/08
Explore readings with your finger or mouse. Arrow keys also work in the chart.
Over the past 24 hours the value ranged between 12.2 °C and 12.5 °C and stayed largely stable.
Based on 9 available values from Nov 7, 2026, 2:00 PM to Nov 8, 2026, 2:00 PM (Swiss local time). The range describes stored values, not necessarily every peak that occurred.
Understanding readings at Modelled lake temperature (1 m depth)
The temperature applies to the stated location and time. A sensor in a tributary does not represent the beach or other depths. Temperature alone says nothing about current, water quality or bathing safety.
This series comes from a temperature model, not a direct on-site measurement. Its name identifies the modeled quantity or depth. The value may differ from the temperature at the shore and is not a bathing safety clearance.
Check the time and source first, then the chart and unit. Missing or disrupted readings cannot support a reliable current assessment. A short comparison describes recent changes, not flood probability. Follow official warnings and local instructions for safety decisions.
Station information
- Lake
- Lake Baldegg
- Location
- Modelled lake temperature (1 m depth)
- Canton
- LU
- Measured quantities
- Water level, Water temperature
- Station number
- baldegg
- Coordinates
- 47.2099, 8.2664
- Source
- Modell: Alplakes / Eawag (Simstrat)